We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
1. HS series slurry pump is created for the continuous pumping of substantial abrasive, substantial density slurries with small routine maintenance requirements. The donning components are made of extremely chrome or and rubber. It will sustain high effectiveness in excess of the put on daily life of its parts.
two. The steel moist elements and rubber types can be interchangeable for handling diverse liquids or slurries.
3. HS slurry pumps are available in sizes ranging from 1 inch to eighteen inch discharge and feature higher efficiency performance capable of movement rates from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for higher head models.
Functions:
one. Cylindrical construction of bearing assembly: hassle-free to adju EPT the space among impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
2. Interchangeable anti-abrasive soaked parts made of higher-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply substantial functioning force abilities
and an extra measure of safety.
four. The discharge department can be oriented to any eight positions at the interval of forty five levels
5. Numerous drive kinds: DC(direct connection), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
S EPT handle, and many others
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Standard Software:
• Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
• Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
• Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • Construction |
• Alumina Industry | • Energy Plant | • Potash Fertilizer Plant | • EPT industries |
• Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
Design | Max Electrical power (Kw) |
Inlet & Outlet measurement (inch) | Content for Wear Elements | Movement Price (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | 15 | one.5/1 | M | 12.6~28.8 | three.5~eight | six~68 | 1200~3800 | 152 |
R | 10.8~25.2 | 3~seven | 7~fifty two | 1400~3400 | 152 | |||
40HS-B | 15 | 2/1.five | M | 32.4~72 | nine~twenty | six~fifty eight | 1200~3200 | 184 |
R | 25.2~54 | 7~15 | 5.5~41 | one thousand~2600 | 178 | |||
50HS-C | 30 | three/two | M | 39.6~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
R | 36~75.6 | ten~21 | 13~46 | 1300~2300 | 213 | |||
75HS-C | 30 | 4/three | M | 86.4~198 | 24~55 | 9~52 | 1000~2200 | 245 |
R | 79.2~180 | 22~50 | five~34.five | 800~1800 | 245 | |||
100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
R | a hundred and forty four~324 | 40~ninety | twelve~45 | 800~1350 | 365 | |||
150HS-E | 120 | 8/6 | M | 360~828 | 100~230 | 10~61 | 500~1140 | 510 |
R | 324~720 | 90~two hundred | seven~49 | four hundred~a thousand | 510 | |||
200MS-E | a hundred and twenty | 10/eight | M | 666~1440 | 185~400 | fourteen~60 | 600~1100 | 549 |
200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~61 | 400~850 | 686 |
R | 540~1188 | a hundred and fifty~330 | 12~fifty | four hundred~750 | 686 | |||
250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~68 | 300~800 | 762 |
R | 720~1620 | 200~450 | 7~forty five | three hundred~650 | 762 | |||
300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
R | 1152~2520 | 320~seven-hundred | 13~forty four | 300~five hundred | 965 | |||
350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | thirteen~fifty seven | two hundred~four hundred | 1370 |
25HHS-C | thirty | 1.5/1 | M | 16.2~34.2 | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
50HHS-D | sixty | 3/two | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
100HHS-E | a hundred and twenty | six/four | M | 324~720 | ninety~200 | 30~118 | 600~a thousand | 711 |
150HHS-S | 560 | 8/6 | M | 468-1008 | one hundred thirty~280 | twenty~ninety four | 500~a thousand | 711 |
For the material of putting on components,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Make contact with
Welcome to contact us any time for specifics.
Your inquiry will get our prompt interest and response !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic tools manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our firm and the listed substitute elements contained herein are not sponsored, approved, or manufactured by the OEM.