The smallest chain complying to ANSI is 25 of six.35 mm pitch. However, in response to the demands for smaller chains lately for large technology machinery such as workplace equipment, healthcare machines and industrial robots, we give 15 of 4.7625 mm (3/16 inch) pitch and in addition 15H1 being a high-power model of 15. These substantial precision chains are produced beneath significant high-quality control in particular expected for small sizes, taking dress in resistance also under consideration.
Collection of chain
Refer towards the “Low-speed selection”. On the other hand, the chain operation pace may be set substantially substantial depending on the sort of lubrication as proven in the table below.
Connecting back links and offset back links
R connecting backlinks are applied for little pitch chains. Nonetheless, considering that their strength is reduced than that of the base chain, and because the clip is 
more likely to come off in high velocity operation, using connecting back links is not recommended. Use a loop chain with no attaching connecting links.
Offset hyperlinks can be found for chains apart from 15 and 15H1, but their use is just not proposed for the identical cause as stated to the R Connecting links.
Working speed and form of lubrication
15: A high precision mini-pitch bushing chain that’s smaller sized than a compact drive chain for standard applications, 25
25: Smallest bushing chain amid ANSI regular chains utilizing curl bushings.
35: A ANSI regular bushing chain suitable for little precision machines that call for substantial power.
Compact Pitch Chain
Tags: