DUMP TRAILER Power UNIT- SINGLE ACTING
This power unit includes a energy up gravity down circuit. Start off the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve might be presented if required. Also a stress compen sated movement handle may be extra towards the circuit to control the descent velocity in the cylinder.
Remark: Please check with our revenue engineer to the different pump displacement, motor energy or tank capability.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic components concerned before installation of the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which should also be clean and totally free of impurities.N46 hydraulic oil is advisable.
four. The power unit should be mounted horizontally.
five. Check the oil level within the tank right after the initial working of the power unit.
six. Oil changing is needed soon after the original one hundred operation hrs, afterwards after just about every 3000 hours.
DUMP TRAILER Power UNIT-DOUBLE ACTING
This energy unit features a energy up energy down circuit with load holding on each A & B ports. A pressure compensatred flow control is often added to circuit to manage the decent speed in the cylinder.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic elements concerned prior to set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities. N46 hydraulic oil is advised.
4. The electrical power unit needs to be mounted horizontally.
five. Check the oil level inside the tank after the preliminary running from the electrical power unit.
6. Oil modifying is required soon after the first 100 operation hours, afterwards the moment every 3000 hrs.