Common Description
Outfitted using the zero leak bidirectional checking sole-noid valves, this energy unit is designed for that operation of two independent circuits. Which are respectively for your main and subordinate platforms of your double scissors lift. Two cut-off valves are utilized for reducing the machine manually in case of power reduction. If additional independent circuits are needed for the application please speak to us for availability.
Remark: 1. Please check with our sales engineer to the different pump displacement, motor power or tank capacity.
2. CSA or UL licensed motors are available upon request.
Specific Notes
1. The AC motor is of S3 duty cycle, which might only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean every one of the hydraulic components concerned before set up of the energy unit.
three. Viscosity from the oil shoud be 15~46 cst,as well as oil must be clean and absolutely free of impurities,N46 hydraulic oil is suggested.
4. The electrical power unit should really be mounted vertically.
five. Check the oil level within the tank following the preliminary operating of the electrical power unit.
6. Oil shifting is required just after the initial 100 operation hours,afterwards once every single 3000 hours.


Recent Posts