Select Page

Downsizing Your System with Larger Electrical power Chains
HK variety roller chains conform to H form of ANSI, and their thickness of inner and outer link plates are equal to those of your up coming bigger size chain. As a result, HK variety roller chains are greater in tensile strength by about 20%and in optimum allowable load by about 15% than people of normal roller chains. Since the excess weight in the chains is additionally bigger, HK style roller chains are appropriate for that application of hefty duty at lower pace.
Encouraged makes use of
?Optimal for spots wherever larger power is required but large and heavier chains can not be made use of.
Selection of chains
Pick a proper HK sort roller chain according to “Low-speed selection”
For your greatest allowable load, see the next table of dimensions.
HK variety roller chains are available as much as triplex.
Sprockets
Use typical sprockets for a simplex HK roller chain Because the transverse pitches are larger than those of standard chains within the case of duplex or triplex, common sprockets cannot be used. Refer towards the sprocket tooth profiles for HK
Connecting hyperlink and offset hyperlink
The tensile power of connecting links and offset backlinks are listed over the left, but the maximum allowable load is lower than that on the base chain. Please talk to us really should you may have any issues. It truly is advised to utilize the connecting link of interference-fitted (FJ, HJ)
In no way make the holes in the connecting plate greater and under no circumstances make the pins thinner to facilitate the do the job for fitting the pins to the connecting plate, since otherwise the fatigue strength will probably be lowered.
Selection of chains
Pick a right HK type roller chain determined by “Low-speed selection”
To the maximum allowable load, see the following table of dimensions.
HK variety roller chains can be found as much as triplex.
Sprockets
Use normal sprockets for any simplex HK roller chain Since the transverse pitches are bigger than people of normal chains from the situation of duplex or triplex, common sprockets cannot be utilised. Refer to your sprocket tooth profiles for HK
Connecting website link and offset link
The tensile strength of connecting hyperlinks and offset back links are listed within the left, but the maximum allowable load is reduce than that on the base chain. Please talk to us must you have any concerns. It can be advisable to make use of the connecting link of interference-fitted (FJ, HJ)
Hardly ever make the holes from the connecting plate bigger and never ever make the pins thinner to facilitate the perform for fitting the pins to the connecting plate, since otherwise the fatigue strength will be lowered.