Material Dealing with Electrical power UNIT two
Standard Description
This power unit features energy up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve together with the decreasing pace managed from the stress compensated movement manage valve. Products of this series may be broadly used in the industry of logistic gadgets for example fork lift, mini lift table, and so on.
Particular Notes
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned in advance of mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which should really also be clean and totally free of impurities, N46 hydraulic oil is advisable .
4. Oil changing is needed after the initial one hundred operation hours,afterwards when each 3000 hours.
five. The energy unit must be mounted horizontally.
Material Managing Electrical power UNIT 1
Basic Description
This power unit is built for that fork lift industry, consisting of very productive gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down movement are controlled through the lever of your guide release valve, which is equipped with an electric switch to activate the motor. 
The lowing speed is managed through the strain compensated movement management valve.
Particular Notes
1. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned in advance of set up of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities, N46 hydraulic oil is encouraged .
four. Oil changing is needed immediately after the initial a hundred operation hrs, afterwards the moment each 3000 hours.
five. The power unit shown is built to be mounted horizontally.