Basic Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is made to operate material handling products. The decreasing movement is achived from the solenoid valve with all the lowering pace controlled by an adjustable needle valve. The left and suitable functions are equipped by using a dual pilot operated check valve and cross-over relief valves.
Remark: Please seek the advice of our sales engineer to the various pump displacement, motor energy or tank capacity.
Specific Notes
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned just before set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be 
clean and totally free of impurities.N46 hydraulic oil is advised.
four. This electrical power unit really should be mounted horizontal.
5. Check the oil level within the tank following the very first start from the energy unit.
six. Oil changing is required right after the preliminary 100 operation hours, afterwards after each 3000 hrs.
SNOW PLOW Electrical power UNIT
Tags: